Technical Notes for the Aircraft Builder - Restorer

1947 Luscombe 8E - 150 Hal Stephens & George Buttles

The following table contains descriptions of useful technical information and data sheets for the aircraft builder, restorer, and/or mechanic. Each information or data sheet is formatted for easy printing should you want a copy for your hangar or shop.

• Printing Instructions you may want to consider:
  • Select the desired information or data sheet.
  • From your browser window click on File, then Page Setup. In the Page Setup window un-check all Header and Footer check boxes. Click OK.
  • Again click File, then Print Frame, then Job Properties. In the Job Properties window select the Paper Size: Letter (8 ½ x 11) or Legal (8 ½ x 14), and Orientation: Portrait or Landscape, as specified below for each information or data sheet. Click Save, then Print.
  • After you have completed printing, you may want to return all settings to their original values.

Technical Note	Paper Size	Orientation	Pages
Data sheet showing number, letter, and fractional drill sizes and their decimal equivalents.	Letter	Portrait	1
Data sheet showing ANS machine screw threads with body and tap drill sizes.	Letter	Portrait	1
Data sheet showing grip length chart for aircraft bolts.	Legal	Portrait	1
Data sheet showing torque values for aircraft bolts, studs, or screws.	Letter	Portrait	1
Chart showing the proper abrasive to use to clean a particular material.	Letter	Landscape	1